Why RJ45 connector Is So Famous As Compared To RJ48

Why RJ45 connector Is So Famous As Compared To RJ48

 What is an RJ45 connector                                       

                                                   RJ45 is a sort of connector widely used for Ethernet media. It appears somewhat like a phone jack but is slightly broader. Since Ethernet wires have an RJ45 connector on each end, Ethernet wires are occasionally also referred to as RJ45 cables.

register jack
RJ45 connector

                                                          The "RJ" at RJ45 stands for "registered jack," because it's a standardized media interface. The"45" only indicates the amount of the port standard. Every single RJ45 connector has eight pins, so an RJ45 cable includes eight individual wires. When you look carefully at the end of an Ethernet cable, you can really find the eight cables, which are a different colour. Four of them are solid colours, while another four are striped

How it is different from RJ-11 Connector

RJ-11 more commonly known as a modem port, phone connector, phone jack or4 phone line or register jack-11 is a four or six wire connection for telephone and modem connectors.
The RJ-11 cable used to connect phones and modems. While the RJ-45 is often used for LAN, ADSL connections etc. It's quite common for connecting computers, networks, telecommunications and factory automation. The Key visual difference between the two connectors is This RJ45 is wider as it contains eight cables, while the RJ11 has four.

RJ-45 vs RJ-48

Most people can easily identify involving an RJ11 and an RJ45 Wiring, and point out the variations and special uses of each. However, when it Comes into an RJ45 and also an RJ48, it turns into just a bit harder. This is Since they generally use the identical modular connector, as well as the dissimilarities between Both, aren't readily identifiable. Both of these RJ types hence differ only in how they're wired.


                                    The RJ-45 utilizes the pin 1,2,3, and 6 to getting and transmitting data. While the RJ-48 has a Couple of configurations Which can Be used based upon the circumstance and the way they should be utilized. 1 configuration utilizes 1, 2, 4 and 5 while the other uses 1,2,7, plus 8.

Post a Comment

0 Comments